
11Example — PROFINET Communication with OPC
Activity
3.
Select the device parameter assignment “CP1613 (RFC1006)” as the PROFInet module and confirm the dialog:
Confirm with “OK”.
4.The last dialog box of the Commissioning Wizard appears. Click the “Finish” button to complete your work with the wizard.
Note
It is only necessary to make settings in advanced symbols, if the “S7_extended” attribute was set during project engineering of the PROFInet data blocks. In this case, extended S7 functionality is used alongside PROFInet. If this functionality is not used, the setting in advanced symbols is irrelevant.
152 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |