2.Installing Client Software

11.If the above file exists, enter the following command.

/opt/toshiba/tap/bin/printconf_import \ –a <queue name> IP_ADDRESS \

rm /opt/toshiba/tap/bin/flag_<queue name>

12.Restart your lpd.

Creating a print queue manually on OpenUNIX

1.Log on to the root account.

2.Open your Linux/UNIX editor.

3.Create the following file.

/etc/lp/interfaces/<queue name>.conf

4.Add a line as below in the <queue name>.conf.

dest=<IP address>

5.Save the file.

6.Enter the following command:

chmod +x <queue name>.conf

7.Enter the following command:

chown lp:lp <queue name>.conf

8.Enter the following command:

lpadmin -p <queue name> -v /dev/null -I any \ -i /usr/lib/lp/model/net_est451c

9.Enter the following command:

accept <queue name>

10.Enter the following command:

enable <queue name>

— Changing the Default Values

You can change the default values of a print queue by the following procedure.

Changing the default values of a print queue

1.Study the interface file, named <queue name>, stored in the / etc/lp/interfaces directory.

This file contains all of the default settings and values that can be set. These values are case sensitive and must conform to the /bin/sh variable format.

Printing Guide — Installing Client Software for UNIX

173

Page 173
Image 173
Toshiba 351C, 451C, 281C manual If the above file exists, enter the following command, Changing the Default Values