4.Monitoring Print Jobs
2.Click [Start Discovery] to begin the process.
•TopAccessDocMon locates the compatible printers in your network.
SUPPLEMENTS: • You can quit the process by clicking [Stop Discovery].
•It may not find the device that is located in the different segment. If a device cannot be found, find a device manually from the [Manual Selection] button.
P.325 "Finding a printer by entering printer address manually"
•If the process continues for a long time, it is because too many network clients are in the network. Also, you must change the discover settings if you want to search for a printer in the IPX/SPX network. In these cases, please configure the discovery set- tings using the [Advanced] button.
P.327 "Configuring Discovery Settings"
NOTE: When the equipment is connected to the IPX/SPX network of the NDS or NDPS envi- ronment, the equipment cannot be discovered on Windows 98/Me. In this case, please configure the connection manually.
P.325 "Finding a printer by entering printer address manually"
3.When the process is complete, the printers that have been found are listed in the list.
324 | Printing Guide — Monitoring Print Jobs with TopAccessDocMon |
