3. Printing
-Long Edge Punch with 180 degree rotation — Select this to create holes on the right side for the portrait document, or on the bottom for the landscape docu- ment.
-Short Edge Punch with 180 degree rotation — Select this to create holes on the bottom for the portrait document, or on the left for the landscape document.
NOTE: This option cannot be selected if a hole punch unit is not installed.
3)Stapling
This sets whether a print job is stapled.
-Off — Select this to print without stapling.
-Upper Left (Portrait)/Upper Right (Landscape) — Select this to staple in the upper left for the portrait document, or in the upper right for the landscape docu- ment.
-Middle Left (Portrait)/Middle Top (Landscape) — Select this to staple double in the left for the portrait document, or in the top for the landscape document.
-Lower Left (Portrait)/Upper Left (Landscape) — Select this to staple in the lower left for the portrait document, or in the upper left for the landscape docu- ment.
294 | Printing Guide — Printing from Macintosh |
