Toshiba 281C, 451C, 351C Installing Client Software for Novell Printing, Windows 98/ME, Windows NT

2. Installing Client Software

Installing Client Software for Novell Printing

This section describes how to install the client software for Novell printing on NetWare print server environments.

There are three ways to set up the printer drivers for Novell printing:

•Using the installer in the Client Utilities CD-ROM

When you insert the Client Utilities CD-ROM into your CD-ROM drive, the installer automatically starts. You can install printer drivers and other client software using the installer. If you want to install printer drivers as well as other client software, this method is convenient.

P.119 "Installation for Novell Printing Using the Installer"

•Using Point and Print

You can install the printer driver by double-clicking network queues on the NetWare. If the NetWare has been set up for NDPS, printer drivers can be downloaded from the system so that the Client Utilities CD-ROM is not required. However, other client software cannot be installed using this method.

P.123 "Installation for Novell Printing by Point and Print"

•Using Add Printer Wizard

When you want to install the printer drivers without connecting to the equipment using Point and Print, install the printer drivers using the Add Printer Wizard.

P.130 "Installation for Novell Printing by Add Printer Wizard"

NOTE: Before installing the printer driver for Novell printing, check with your system adminis- trator to make sure of the following:

-This equipment is connected to the network and turned on.

-The NetWare server is configured correctly and running on your network.

-The IPX/SPX or TCP/IP, and NetWare settings are correct on this equipment.

Before installing the client software for Novell printing, please make sure following net- work services and protocols are installed on your computer:

Windows 98/ME

•TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)

•IPX/SPX-compatible protocol (Required only when using the NetWare in the IPX/ SPX network.)

•Client for NetWare Network

•Service for NetWare Directory Service (Required only when using the NetWare server in NDS mode.)

Windows NT 4.0

•TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)

•NWLink IPX/SPX Compatible Transport protocol (Required only when using the NetWare in the IPX/SPX network.)

•NWLink NetBIOS protocol (Required only when using the NetWare in the IPX/SPX network.)

•Gateway (and Client) Services for NetWare

Windows 2000/XP/Server 2003

•NWLink IPX/SPX/NetBIOS Compatible Transport Protocol (Required only when using the NetWare in the IPX/SPX network.)

•Gateway (and Client) Services for NetWare

118 Printing Guide — Installing Client Software for Windows