2. Installing Client Software

13.The installation is completed.

NOTE: Before using the printer driver for printing, please configure the installed options of the equipment and department code (if required) on the printer driver.

P.194 "Before Using the Printer Driver"

Installation for Parallel Printing by Plug and Play

The procedure to install the printer driver for Parallel printing by Plug and Play differs depending on the version of the Windows being used.

P.32 "Windows 98/Me"

P.35 "Windows 2000"

P.38 "Windows XP/Server 2003"

SUPPLEMENTS: • TopAccessDocMon is not available when this equipment is only connected using the printer cable. However, when this equipment and your computer are connected to the local area network as well as this equipment is connected to the parallel port of your computer, you can use TopAccessDocMon to monitor your print jobs. To install TopAccessDocMon, you must install it from the Client Utilities CD-ROM sepa- rately.

The Agfa Font Manager is also available to install and manage the TrueType fonts on your computer. To install the Agfa Font Manager, you must install it from the Cli- ent Utilities CD-ROM separately.

NOTE: The Plug and Play function is not supported in the Windows NT 4.0.

— Windows 98/Me

Installing the printer driver for parallel printing by Plug and Play

The following describes an installation on Windows 98. The procedure is the same when Windows Me is used.

1.Connect the printer cable to this equipment and your com- puter, and then power on the equipment and your computer.

• The Add New Hardware Wizard dialog box appears.

2.Click [Next].

32

Printing Guide — Installing Client Software for Windows

Page 32
Image 32
Toshiba 351C, 451C, 281C manual Installation for Parallel Printing by Plug and Play, Installation is completed