2.Installing Client Software

8.Make sure the created LPR port is checked in the “Print to the following port” list and click [OK] to save settings.

NOTE: Before using the printer driver for printing, please configure the installed options of the equipment and department code (if required) on the printer driver.

P.194 "Before Using the Printer Driver"

— Windows 2000/XP/Server 2003

Configuring the Raw TCP/LPR port for Windows 2000/XP/Server 2003

The following describes an installation on Windows 2000. The procedure is the same when Windows XP or Windows Server 2003 is used.

NOTE: You must log into Windows as a user who has the “Administrators” or “Power Users” privilege when using Windows 2000, Windows XP, or Windows Server 2003.

1.Install the client software using the installer in the Client Util- ities CD-ROM.

Please install the client software following the instruction of the installation for parallel printing.

P.27 "Installation for Parallel Printing Using the Installer"

Printing Guide — Installing Client Software for Windows

67

Page 67
Image 67
Toshiba 281C, 451C, 351C manual Before Using the Printer Driver