Toshiba 281C, 451C, 351C Smoothing, Distinguish Thin Lines, Do not Print Blank Pages, Toner Save

3. Printing

— Smoothing

The smoothing mode can be set using the following option.

Option Value	Alternate Value	Description
smoothing=on	ON	Set the smoothing mode.
smoothing=off	OFF	Cancel the smoothing mode.

Example: The command to set the smoothing mode is “lp –o smoothing=on filename”.

— Distinguish Thin Lines

The thin line limit mode can be set using the following option.

Option Value	Alternate Value	Description
thinlinelimit=on	ON	Set the thin line limit mode.
thinlinelimit=off	OFF	Cancel the thin line limit mode.

Example: The command to set the thin line limit mode is “lp –o thinlinelimit=on filename”.

— Do not Print Blank Pages

The Blank page mode can be selected using the following option.

Option Value	Alternate Value	Description
blankpage=0		Set the blank page mode (disable Do not Print Blank
		Pages).
blankpage=1		Cancel the blank page mode (enable Do not Print Blank
		Pages).

— Toner Save

The toner save mode can be set using the following option.

Option Value	Alternate Value	Description
tonersave=on	ON	Set the toner save mode.
tonersave=off	OFF	Cancel the toner save mode.

Example: The command to set the toner save mode is “lp –o tonersave=on filename”.

— Booklet Modes

The booklet mode can be selected using the following options.

Option Value	Alternate Value	Description
booklet=letter	lt	Select letter size paper for booklet printing mode.
	LT
booklet=A4	a4	Select A4 size paper for booklet printing mode.
booklet=legal	lg	Select legal size paper for booklet printing mode.
	LG
booklet=	st	Select statement size paper for booklet printing mode.
statement	ST

304 Printing Guide — Printing from UNIX