
3. Printing
NOTE: This is only available for PCL5c printer driver and PS3 printer driver.
Printing a color document in gray scale
1.Display the Setup tab and select “Mono” at the “Color” drop down box.
2.Set other print options you require and click [OK].
3.Click [OK] or [Print] to send a print job.
• The print job is printed in gray scale.
—Stapling and Hole Punching
You can staple and punch the paper.
NOTES: • Stapling is not available if a finisher is not installed.
•Hole Punching is not available if a hole punch unit is not installed.
Stapling the paper
1.Display the Setup tab and select how to staple at the “Staple” drop down box.
Upper Left — Select this to staple the printed document in the upper left. Center Top — Select this to staple the printed document double in the upper side.
Upper Right — Select this to staple the printed document in the upper right. Middle Left — Select this to staple the printed document double in the left. Center Double — Select this to fold and staple the printed document double in the center.
NOTES: • The selectable options vary depending on the paper size.
•“Center Top” can be selected only when the
2.Set other print options you require and click [OK].
3.Click [OK] or [Print] to send a print job.
• The output is stapled for each copy.
Printing Guide — Printing from Windows | 247 |