2.Installing Client Software
2.To manually edit the configuration file (/etc/lp/interfaces/ <queue name>.conf), add a line that consists of the parame- ter and value.
•For example, to change the default orientation to Landscape, add the follow- ing line:
orient= “LANDSCAPE”
— Deleting the Print Queue
There are two ways to delete the print queue: one is deleting a print queue using est451crm, and the other is deleting a print queue manually without using est451crm.
P.174 "Deleting a Print Queue Using est451crm"
P.174 "Deleting a Print Queue Manually"
Deleting a Print Queue Using est451crm
When you want to delete the queue using est451crm, perform the following procedure.
Deleting a print queue
1.Log on to the root account.
2.Enter the following command:
est451crm <queue name>
SUPPLEMENTS: • This command uses the system’s lpadmin command to delete the print queue and configuration file.
•Please restart the lpd under Linux.
Deleting a Print Queue Manually
You can also configure the print queue by adding a print queue manually.
The procedure varies depending on the operating systems.
P.174 "Deleting a print queue manually on Solaris"
P.174 "Deleting a print queue manually on
P.175 "Deleting a print queue manually on IBM AIX"
P.175 "Deleting a print queue manually on Linux"
P.176 "Deleting a print queue manually on OpenUNIX"
Deleting a print queue manually on Solaris
1.Log on to the root account.
2.Enter the following command:
lpadmin
3.Enter the following command:
rm /etc/lp/interfaces/<queue name>.conf
Deleting a print queue manually on
1.Log on to the root account.
174 | Printing Guide — Installing Client Software for UNIX |
