2.Installing Client Software

10.Click the [Printing] menu and select [Change Setup...].

• The LaserWriter setup dialog box appears.

11.Select each option item in the “Change” drop down menu and select installed option in the “To” drop down menu according to the configuration of this equipment.

zFInisher

Not Installed — Select this when no finisher is installed.

Single-Position Stapler — Select this when the Hanging Finisher is installed. Multi-Position Stapler — Select this when the Multi-staple Finisher or Saddle- stitch Finisher is installed.

Multi-Position Stapler and Hole Punch — Select this when the Multi-staple Finisher or Saddle-stitch Finisher and Hole Punch unit are installed.

NOTE: When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”, the saddle-stitching function will be selectable for printing. However, saddle-stitching is available only when the Saddle-stitch Finisher is installed.

zDrawer

Not Installed — Select this when no optional drawer is installed. Drawer 3 — Select this when the drawer 3 is installed.

Drawer 3 & 4 — Select this when the drawer 3 and 4 are installed. LCF — Select this when the Large Capacity Feeder is installed.

NOTE: LCF is not available for some countries or regions.

12.Click [OK].

154

Printing Guide — Installing Client Software for Macintosh

Page 154
Image 154
Toshiba 281C, 451C, 351C manual Click the Printing menu and select Change Setup, FInisher