Toshiba 451C, 281C, 351C manual Configuring Unix Printing Using Unix Filters, System Requirements

2. Installing Client Software

Planning for Installation

— System Requirements

For UNIX workstation, the following environment is required.

OS:	Sun Solaris v2.5.1/2.6/2.7/7.8/8/9
	HP-UX Version 10.20/11.x
	IBM AIX 4.1.5/4.3.3/5L
	SCO UNIXWare 7
	SCO OpenUNIX 8
	Red Hat Linux 6.2/7.1/7.2/7.3/8.0
	SuSE Linux ver 7.0/8.1
	Mandrake Linux ver 7.1/9
Protocol:	Turbo Linux 8
	TCP/IP
Module:	Python must be installed.

NOTE: The “Python” module must be installed on your UNIX workstation to enable printing. The “Python” module is usually installed in the “/usr/bin/” directory. Check this directory whether the “Python” module is installed.

Configuring UNIX Printing Using UNIX Filters

When you want to configure the UNIX printing using the UNIX filters, install the UNIX fil- ters and configure the LPR queue.

— Installing the UNIX Filters

UNIX Filters are provided as TAR files for each Operating System. You can install them by copying the TAR file into the root directory and extract the file.

Copying the UNIX filters

1.Insert the Client Utilities CD-ROM into the CD-ROM drive.

2.Log on to the root account and copy the TAR file onto the root.

•A TAR file for each operating system is included in following folders: For Solaris: [CD-ROM]/Admin/solarisfilter/usa/

For HP-UX:[CD-ROM]/Admin/hp-uxfilter/usa/ For AIX:[CD-ROM]/Admin/aixfilter/usa/

For Linux: [CD-ROM]/Admin/linuxfilter/usa/

For OpenUNIX: [CD-ROM]/Admin/openunixfilter/usa/

3.Enter the following command and check the output:

zFor Solaris: uname -a

Output on screen should be:

SunOS

zFor HP-UX:

uname -a

Output on screen should be:

HP-UX

168 Printing Guide — Installing Client Software for UNIX