
2. Installing Client Software
19.Click [Finish].
• Start copying files.
20.The installation is completed.
NOTE: Before using the printer driver for printing, please configure the installed options of the equipment and department code (if required) on the printer driver.
P.194 "Before Using the Printer Driver"
Installing Client Software for SMB Printing
This section describes how to set up the client software for SMB printing which is avail- able for the local area network over TCP/IP.
There are three ways to set up the printer drivers for SMB printing:
•Using the installer in the Client Utilities
When you insert the Client Utilities
P.85 "Installation for SMB Printing Using the Installer"
•Using Point and Print
You can install the printer driver by
P.96 "Installation for SMB Printing by Point and Print"
•Using Add Printer Wizard
When you want to install the printer drivers without connecting to the equipment using Point and Print, install the printer drivers using the Add Printer Wizard.
P.99 "Installation for SMB Printing by Add Printer Wizard"
NOTE: Before installing the printer driver for SMB printing, check with your system administra- tor to make sure of the following:
-This equipment is connected to the network and turned on.
-The TCP/IP setting is correct on this equipment and your computer.
Installation for SMB Printing Using the Installer
You can install the client software and set up the SMB printing using the installer in the Client Utilities
Printing Guide — Installing Client Software for Windows | 85 |