![](/images/new-backgrounds/1203821/203821341x1.webp)
2. Installing Client Software
Creating a print queue manually on
1.Log on to the root account.
2.Open your Linux/UNIX editor.
3.Create the following file.
/etc/lp/interfaces/<queue name>.conf
4.Add a line as below in the <queue name>.conf.
dest=<IP address>
5.Save the file.
6.Enter the following command:
chmod +x <queue name>.conf
7.Enter the following command:
chown lp:lp <queue name>.conf
8.Enter the following command:
ps -ef grep lpsched grep -iv grep > /dev/null 2>&1
9.Enter the following command:
Echo $?
10.If “0” is outputted on the screen, turn the scheduler OFF.
Enter the following command:
/usr/sbin/lpshut > /dev/null 2>&1
11.Enter the following command:
/usr/sbin/lpadmin
12.Enter the following command:
accept <queue name>
13.Enter the following command:
enable <queue name>
14.If you turn OFF the scheduler in step 10, turn the scheduler
ON. Enter the following command:
/usr/lpsched > /dev/null 2>&1
Creating a print queue manually on IBX AIX
1.Enter the following command:
ls /opt/toshiba/tap/filter
2.If the above directory does not exist, enter the following
command:
mkdir /opt/toshiba/tap/filter
3.Log on to the root account.
Printing Guide — Installing Client Software for UNIX | 171 |