Administration Guide

Managing a BlackBerry Domain

b.Change the value to the port number. To limit the number of LDAP queries that the BlackBerry Enterprise Server needs, use the port number of the global catalog server (port 3268).

6.If the BlackBerry Enterprise Server must use LDAPS to connect to the Microsoft Active Directory, perform the following actions:

a.Create a DWORD value named LDAPssl.

b.Change the value to 1.

7.To change the amount of time that the BlackBerry Enterprise Server waits for a response from Microsoft Active Directory before the connection times out (by default, 10 seconds), perform the following actions:

a.Create a DWORD value named LDAPTimeout.

b.Change the value to the timeout period, in seconds, that your organization requires.

8.In the Windows Services, restart the BlackBerry Controller.

Related information

Restarting BlackBerry Enterprise Server components, 392

Configure the BlackBerry Enterprise Server to retrieve email addresses and organizer data using LDAP

1.On the computer that hosts the BlackBerry Enterprise Server, click Start > Run.

2.Type regedit. Click OK.

3.Perform one of the following actions:

If you are running a 32-bit version of Windows, navigate to HKEY_LOCAL_MACHINE\Software\Research In Motion \BlackBerry Enterprise Server\Agents.

If you are running a 64-bit version of Windows, navigate to HKEY_LOCAL_MACHINE\Software\WOW6432Node \Research In Motion\BlackBerry Enterprise Server\Agents.

4.Create a DWORD value named LDAPSearch.

5.Change the value to 1.

6.To configure the BlackBerry Enterprise Server to resolve email addresses using LDAP, perform the following actions:

a.Create a DWORD value named LDAPALPSearch.

b.Change the value to 1.

7.To configure the BlackBerry Enterprise Server to resolve organizer data using LDAP, perform the following actions:

a.Create a DWORD value named LDAPPIMSearch.

414

Page 414
Image 414
Blackberry SWD-20120924140022907 manual Restarting BlackBerry Enterprise Server components