B Control panel menus | 216 |
Resets submenu
Note | Use this menu with caution. You can lose buffered page data or product configuration settings when you select these |
| items. Reset the product only under the following circumstances: |
|
|
zYou want to restore the product default settings.
zCommunication between the product and computer has been interrupted.
zYou are having problems with a port.
The items in the Resets submenu will clear all memory in the product, while RESET clears only the current job.
Item | Explanation |
|
|
RESTORE FACTORY | This item performs a simple reset and restores most of the factory (default) settings. This item |
SETTINGS | also clears the input buffer for the active I/O. |
| address book is not cleared. |
| Resetting memory during a print job can result in data loss. |
| This item does not affect network settings stored on the HP Jetdirect print server (if installed). |
|
|
CLEAR MAINTENANCE | This item appears only after the PERFORM PRINTER MAINTENANCE message displays. |
MESSAGE | OFF: The PERFORM PRINTER MAINTENANCE message will be cleared. If you do not replace the |
| |
| printer maintenance kit, the PERFORM PRINTER MAINTENANCE message will be displayed again |
| after approximately 17,500 pages. |
| The message should not be turned off unless the necessary product maintenance has been |
| performed. If the required maintenance is not performed, product performance will degrade. |
| For more information, see “Product maintenance” on page 83. |
Configure device menu