
5 Printing | 56 |
Selecting the output bin
See “Selecting the output bin” on page 42 for more information about selecting an output bin.
Selecting an output location
You can select an output location (bin) through your program or driver. (Where and how you make selections depends on your program or driver.) If you cannot select an output location from the program or driver, set the default product output location from the product control panel.
To select an output location from the control panel
1Touch Menu.
2Touch Configure Device.
3Touch Printing.
4Scroll to Paper Destination, and then touch Paper Destination to view the output bin options.
5Scroll to the output bin or device you want, and then touch OK. An asterisk (*) appears next to your selection.
Printing envelopes
You can print envelopes using Tray 1, which holds up to 10 envelopes. Many types of envelopes can be printed from Tray 1.
Printing performance depends on the construction of the envelope. Always test a few sample envelopes before purchasing a large quantity. For envelope specifications, see the introduce guide on the product CD, or go to www.hp.com/support/lj9000.
CAUTION | Envelopes with clasps, snaps, windows, coated linings, exposed |
| severely damage the product. Do not use envelopes with |
|
|
The basic steps for printing envelopes are:
1Load the envelopes. See “To load envelopes in Tray 1” on page 57.
2Move the fuser levers. See “To change the fuser levers” on page 58.
3Send the print job. See “To print envelopes from a program” on page 59.