HP 9000Lmfp manual Problem solving 124, Expansion on

7 Problem solving 124

Message		Explanation or recommended action
MEMORY SETTINGS		Indicates the resource saving or I/O buffering settings were changed by the product because it
CHANGED		did not have enough memory to use the previous settings. This usually occurs after removing
		memory from the product, adding a duplex printing accessory, or adding a printer language.
		You might want to change memory settings for I/O buffering and resource saving (although
		default settings are usually best), or add more memory to the product (See “Product memory
		and expansion” on page 218).
MEMORY SHORTAGE		The product did not have enough free memory to print the entire job. The remainder of the job
JOB CLEARED		will not print and will be cleared from memory.
alternates with		Touch Continue to continue.
Ready		Change the resource saving setting from the product control panel (See “Control panel menus”
		on page 185) or add more memory to the product (See “Product memory and expansion” on
		page 218).
MEMORY SHORTAGE PAGE		The product had to compress the job in order to fit it in available memory. Some data loss might
SIMPLIFIED		have occurred.
alternates	with	Touch Continue to continue.
Ready		The print quality of these pages might not be acceptable. Reduce the complexity of these pages
		and reprint them.
		You might want to add more memory to the product (See “Product memory and expansion” on
		page 218).
NO JOB TO	CANCEL	The Cancel button was pressed, but there is no active job or buffered data to cancel.
		Message is displayed for approximately two seconds before the product is returned to the
		READY state.

Understanding product messages