C Product memory and expansion

222

4Grasp the screws and pull the formatter board out of the product. Place it on a flat, non-conductive surface.

5Remove the DIMM from the antistatic package. Hold the DIMM with fingers against the side edges and thumbs against the back edge. Align the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open, or outward.)

See “Installing memory” on page 220 for the maximum amount of memory for each DIMM slot.

6Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (To remove a DIMM, the locks must be released.)

4

5

6

Installing memory