B Control panel menus | 214 | ||
|
|
|
|
|
|
|
|
|
|
|
|
Item | Options | Values | Explanation |
|
|
|
|
IPX/SPX | ENABLE | ON | Selects whether the IPX/SPX protocol stack is enabled (ON) or |
|
| OFF | disabled (OFF). |
| FRAME TYPE | AUTO | Selects the frame type setting for your network |
|
| EN_8023 | AUTO (default) automatically sets and limits the frame type to |
|
| EN_II | |
|
| the first one detected. | |
|
| EN_8022 | |
|
|
| |
|
| EN_SNAP | For an Ethernet network only, frame type selections include |
|
| TR_8022 | EN_8023, EN_II, EN_8022, and EN_SNAP. |
|
| TR_SNAP | For a Token Ring network only, frame type selections include |
|
|
| |
|
|
| TR_8022 and TR_SNAP. |
SOURCEAUTO
ROUTING OFF
ALL ROUTES SINGLE ROUTE
For a Token Ring network only, specify the NetWare Token Ring Source Routing parameter.
AUTO (default): The type of source routing required on the network is automatically sensed.
OFF: All packets are sent without source routing, and only packets from the same ring are received.
ALL ROUTES and SINGLE ROUTES: All packets are sent with source routing (broadcasts and when the route is unknown).
APPLETALK | ENABLE | ON | For an Ethernet network only, selects whether the AppleTalk |
|
| OFF | protocol is enabled (ON) or disabled (OFF). |
|
|
|
|
DLC/LLC | ENABLE | ON | Selects whether the DLC/LLC protocol stack is enabled (ON) or |
|
| OFF | disabled (OFF). |
