B Control panel menus | 207 | ||
|
|
|
|
|
|
|
|
|
|
|
|
Item | Values | Explanation |
|
|
|
CARTRIDGE LOW= | CONTINUE | Determine how the product functions when toner is low. The CARTRIDGE |
CONTINUE | STOP | LOW message first appears when the print cartridge is almost out of toner. |
|
| (About 2,400 pages can still be printed at five percent coverage.) |
|
| CONTINUE: The product continues to print while the CARTRIDGE LOW |
|
| message is displayed. |
|
| STOP: The product goes offline and wait for further action. |
|
| For more information, see “Managing the print cartridge” on page 90. |
|
|
|
JAM RECOVERY= | AUTO |
AUTO | ON |
| OFF |
Determine how the product functions when a jam occurs.
AUTO: The product automatically selects the best mode for product jam recovery (usually ON). This is the default setting.
ON: The product automatically reprints pages after a jam is cleared.
OFF: The product does not reprint pages following a jam. Printing performance might be increased with this setting.
RAM DISK=AUTO | AUTO | This item determines how the RAM disk is configured. This item appears |
| OFF | only if there is no optional hard disk installed, and the product has at least |
|
| 8 megabytes (MB) of memory. |
|
| OFF: The RAM disk is disabled. |
|
| Note |
|
| If the setting is changed from OFF to AUTO, the product automatically |
|
| reinitializes when it becomes idle. |
|
|
|
LANGUAGE=ENGLISH |
| Includes all languages in the list. |
|
| When scrolling through the language values, LANGUAGE= should be |
|
| updated so it is presented in the highlighted language. |
Configure device menu