F Administration tasks | 250 |
Finding the IP address of the SMTP and LDAP servers
To configure digital sending, you must know the IP address of the SMTP server on your network. The product uses the SMTP server IP address to send
Use the following methods to find the IP addresses of the SMTP and LDAP servers that the digital sending function uses.
Using Find Send Gateways
On the touch screen of the graphical display:
1Touch Menu.
2Touch Configure Device.
3Touch Sending.
4Touch
5Touch Find Send Gateways. The product searches your local network to try to determine the IP address of the SMTP gateway and the IP address of the LDAP server and displays the results on the touch screen. If the SMTP server or LDAP server is outside of your local network, the Find Send Gateways function will probably not be successful.
Using your e-mail client
Because most
1At your computer, open the Command Prompt (also known as
2Type nslookup followed by the hostname (for example, nslookup hostname).
3Press ENTER.
When you have found the IP address of the SMTP and LDAP servers, use them to configure digital sending. The embedded Web access server, HP Web JetAdmin, or the control panel can be used to do this.