99
Operator Panel Menus
USB Menu
Use the USB MENU to change settings affectingthe Uni-
versal Serial Bus (USB) interface port. The USB MENU
displaysas a standard feature or as an option, and appears
as one of the following:
STANDARDUSB
USB OPTION1
USB OPTION1 is only available if a parallel/USB inter-
face option cardis installed on the printer s ystem board.
See Using a USB Cableon page 14 for information on
how to attached a USB cable and Parallel/USB Interface
Option Cardonpage 215 for installation information.
USB Menu
MenuItem Values
PCLSmar tSwitch Off
On*
If PCLSmar tSwitch is set to On, the printer examines the data on the USB interface
connection and selects PCL emulationif the data indicates that is the printer language.
Ifboth PCL SmartSwitch and PS Smar tSwitch are set to Off,the pr inter uses the language
specifiedinthePrinterLanguagemenu as the default. If only one SmartSwitch setting is
setto Off,the printer uses the language that has its Smar tSwitch setting set to On as the
default.
PS SmartSwitch Off
On*
If PSSmar tSwitch is set to On, the printer examines the data on the specified USB
interfaceconnection and selects PostScript 3 emulation if the data indicates that is the
printer language.
Ifboth PCL SmartSwitch and PS Smar tSwitch are set to Off,the pr inter uses the language
specifiedinthePrinterLanguagemenu as the default. If only one SmartSwitch setting is
setto Off,the printer uses the language that has its Smar tSwitch setting set to On as the
default.
*Factorydefault