131
Loading Print Material
3Flexthe sheets back and forth to loosen them, then
fan them. Donotfoldorcreasetheprintmaterial.
Straighten the edges on a level surface.
Note: Do not load different
sizesor types of print material in
the multipurpose feeder at the
same time. Doing so maycause
a paper jam.
4Locate the stack height limiter on the left side of
the printer.
5Place the print material against the left side of the
multipurpose feeder with the recommended print
sideface up and the top edge going in first toward
the printer.
Note: Do not exceedthe maxi-
mumstack height limiter located
on the left side of the multipur-
pose feeder.
StackHeight Limiter