102
Chapter 3: Using the Operator Panel and Menus
Fax Menu
Use the FAXMENU to change settings affecting fax data
receivedby the printer through the serial interface port on
the Tri-Portinterface option card.
Withthe Tri-Port interface option card installed, the
printer can receiveand print fax data.
If Fax Port is set to Disabled, all other menu items in the
FAXMENU are not available.
Ser Option 1 is only available if a Tri-Portinterface option
cardis installed in your printer. See “Tri-Port Interface
Option Card”onpage 212 or “Fax”on page 197 for more
information.
Fax Menu
MenuItem Values
FaxPort Disabled*
Ser Option 1
Select SerOption 1 to activate the serial por t on the Tri-Portinterface option card and
configurei t to receivefax data.
Ifyou select Disabled, all of the other menu items in the FA X MENU are not available.
FaxBaud 1200
2400
4800
9600
19200*
38400
57600
115200
This setting lets youselect the rate at which fax data is being sent to or from your computer.
Referto the
TechnicalReference
forinformation about the range of baud values.
Fax Data Bi ts 7
8*
This setting lets youselect the number of fax data bits that are sent in each transmission
frame.Refer to the
TechnicalReference
formore information about data bits.
*Factorydefault