11
Installing the Paper Bail
Installing the
Paper Bai l The paper bail helps preventoffset bin stacking by guid-
ing print material into the standardoutput bin.
The paper bail consists of two parts: a plastic bracket
alreadyinstalled on the printer and a metal bail.
Complete the following steps to install the metal bail:
1Locate the metal bail that comes with your printer.
2Orient the metal bail as shown.
3Place the tips of the metal bail into the holes
located on either end of the plastic bracket as
shown.
Note: The paper bail is
not
depicted in other illustrations
throughout this book now that
youhaveinstalledit.
MetalBail PlasticBracket