107
Operator Panel Menus
FactoryDefaults RestoreA ll
Ifyou select Restore All:
•Alld ownloadedresources (fonts, macros, symbol sets) in printer memory (RAM) are
deleted.( Resourcesr esiding inflash memor y or on the hard disk option are unaffected.)
•Allmenu settings are retur ned to the factory defaultvalues except:
–DisplayLanguage (SETUP MENU) which is the operator panel display language.
–Allsettings in the PARALLEL MENU, SERIAL MENU, NETWORK MENU, INFRARED
MENU,LOCALTALK MENU,USB MENU, and FAX MENU.
Themessage Restoring Factory Defaults br iefly appears while the printer restores the factory
defaultsettings. See Restoring Factory Defaults on page 157 for more information.
NARROWMEDIA PlainWidth
CardStock Width
TrnsprncyWidth
Labels Width
BondWidth
LetterheadW idth
Preprinted Width
ColoredWidth
EnvelopeWidth
Custom1 Width
Custom2 Width
Custom3 Width
Custom4 Width
Custom5 Width
Custom6 Width
Each ofthe above menu items support the following values as a second menu:
Normal*
Narrow
SetNARROW MEDIA to Narrow when using print material less than 172 mm (6.77 in.) in width,
so the printer can adjust its speed, thus prolonging the lifeof the fuser.
Custom
x
Widthrefers to special types of print materials. You can change the names through a
utility,such as MarkVision. If a user-defined name is available, the name displays instead of
Custom
x
Width,where
x
represents a number1 through 6. Theu ser-defined name is
truncated to 16 characters.
ExitConfig Menu Press Selectto exit the CONFIG MENU. The printer automatically restarts and retur ns to the
Readystate.
Config Menu (continued)MenuItem Values
*Factorydefault