228
Chapter 13: Infrared Adapter
3Plug the adapter cable into the infrared port.
4Reconnect the printer power cord to a properly
grounded electrical outlet.
If any light on the infraredadapter comes on when
theprinter is plugged in, the adapter is connected to
the port correctly.
5Aim the computer infrared port at the infrared
port on the front of the Tri-Portinterface option
card.
Refer to the documentation that came with your
computer for information about your computer
infraredport.
6Draw an imaginary line between the two infrared
ports. Aim the infrared port on your computer
within 15 degrees of either side of this line, as
shown.
7Send a job to print.
Ifthe job does not print correctly, see Infrared Adapter
on page 181.
Adapter
Cable
Infrared
Port