132
Chapter 4: Using Print Materials
6Slide the print material into the multipurpose
feeder as far as it will go. Do not forceit. Forcing
print material could cause a paper jam.
7Slide the paper width guide to the left until it
lightly touches the edge of the print material.
Make surethe print material fits loosely in the mul-
tipurposefeeder and is not bent or wrinkled. Do not
overload the multipurpose feeder.
8Send your job to print.
For information on duplexing, see “Manual Duplex
Printing”on page 136.
Paper
WidthGuide