82
Chapter 3: Using the Operator Panel and Menus
TRAYRENUMBER AssignMP Feeder
Assign Tray1
Assign Tray2
Assign Man Paper
Assign Man Env
Each of the abovemenu items suppor ts the followingthree values:
Off*
0...199
None
VIEW FACTORYDEF
RestoreDefaults
Yes
No
Note: AssignTray 2 only displays if the optional 500-sheet drawer is installed.
AssignMP Feeder only displayswhen Configure MP is set to Cassette.
Only installed paper sourcesd isplayon the operator panel as values. However, you may set
TRAYRENUMBER to uninstalled sources.
The TRAYRENUMBER menu item lets you configure your printer to work with printer drivers
or applications that use differentsource assignments to request a given input source.
Select Offto use the factory default paper source assignments.
Selecta numer icvalue (0 ... 199)toassignacustomvaluetoapapersource.
SelectVIEW FACTORY DEF to view the factory default values assigned to each paper source.
Inthe Restore Defaults menuitem, select Ye s toretur n allt rayassignments to factory default
values.
See “PaperSources and Sizes”on page 116 for information on available paper sources for
yourprinter.
Referto the
TechnicalReference
formore information about assigning source numbers.
AutoCR after LF Off*
On
TheAuto CR after LF setting determines if the printer automatically performs a carr iage return
aftera line feed control command.
AutoLF after CR Off*
On
TheAuto LF after CR setting deter mines if the printer automatically performs a line feedafter
acarr iage return control command.
PCL Emul Menu (continued)
MenuItem Values
*Factorydefault