110
Chapter 3: Using the Operator Panel and Menus

Verify P rint Job

When you createa Verify Print job, the job formats, and
onecopy of the job prints. Additional requested copies are
held in printer memory.You specify the number of copies
you want when you send the job fromthe printer driver.
This allows you to examine the first copy to see if it is sat-
isfactory beforeyou print t he other copies.
If the job is unsatisfactory,you would not want the other
copies to print. Todelete the job, you must select the
DELETEA JOB value, and select this job to delete it. See
DELETEA JOB on page 68 for more information.
If the job is satisfactory,you can change the number of
copiesto print or print the number of copies already set in
the printer driver.
Tochange the number of remaining copies to print:
1Select PRINTCOPIES.
2Select the specific job.
3Atthe Copies prompt, change the number of copies
to print from the number set in the printer driver
and press Select.
4PressReturn until you exit the menus or press Go to
exit the menus. Once the printer exits the menus
and returns to an online state, the remaining copies
print.
Once all copies areprinted, the job is deleted from
printer memory.For more information, see PRINT
COPIES on page 69.
Toprint the number of copies set in the printer driver:
1Select PRINTA JOB .
2Select the specific job. The remaining copies print.
Once all copies areprinted, the job is deleted from
printer memory.For more information, see PRINT A
JOB on page 67.