127
Loading Print Material
5Flexthe sheets back and forth to loosen them, then
fan them. Donotfoldorcreasetheprintmaterial.
Straighten the edges on a level surface.
6Place the print material against the left side of the
input tray and insert it under the metal stop.
Makesuretherecommendedprintsideisfacedown
andthefrontedgeisplacedtowardthefrontofthe
input tray.
Forinformation on loading letterhead, see “Printing
on Letterhead”onpage 135.
Note: Make sure the print
material fits easily under the
metal stop and is not bent or
wrinkled. Do not raise the metal
stopor force print material under
the metal stop.
MetalStop