217
Installing an Option Card
3Remove the metal plate covering the connector
slot.
aLocatethe two screws on the back of the printer
that attach the metal plate to the slot.
bRemove and save the two screws. Remove and
discard the plate.
4Unpack the option card.
Save the packing materials.
5Align the connector on the option card with the
connector on the system board.
The cable connectors on the side of the option card
must fit throughthe opening in the faceplate.
6Push the option card firmly into the option card
connector on the system board.
FaceplateOpening
OptionCard Connector