Lexmark M410, M412 With a Network Adapter Installed

245

Appendix B: Notices

With a Network AdapterInstalled

TheLexmark Optra M410n and M412n laser printers, Type 4045, have been tested and

foundto comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCCRules. Operation is subject to the following two conditions: (1) this device may not

causeharmful interference, and (2) this device must accept any interference received,

includinginterference that may cause undesired operation.

TheFCC Class A limits are designed to provide reasonable protection against harmful

interferencewhen the equipment is operated in a commercial environment. This equip-

mentgenerates, uses, and can radiate radio frequency energy and, if not installed and

usedin accordance with the instruction manual, may cause harmful interference to

radiocommunications. Operation of this equipment in a residential area is likely to

causeharmful interference in which case the user will be required to correct the interfer-

enceat his own expense.

Themanufacturer is not responsible for any radio or television interference caused by

usingother than recommended cables or by unauthorized changes or modifications to

thisequipment. Unauthorized changes or modifications could void the user’sauthority

tooperate this equipment.

Note:To assure compliance with FCC regulations on electromagnetic interferencefor a

ClassA computing device, use a properly shielded and grounded cable such as Lex-

markpart number 1329605 for parallel and 12A2405 for USB. Use of a substitute cable

notproperly shielded and grounded may result in a violation of FCC regulations.

ThisClass A digital apparatus meets all requirements of the Canadian Interference-

CausingEquipment Regulations.

Cetappareil numérique de la classe A respecte toutes les exigences du Règlement sur le

matérielbrouilleur du Canada.

Thisproduct is in conformity with the protection requirements of EC Council directives

89/336/EECand 73/23/EEC on the approximation and harmonization of the laws of

theMember States relating to electromagnetic compatibility and safety of electrical

equipmentdesigned for use within certain voltage limits.

Adeclaration of conformity with the requirements of the Directive has been signed by

theDirector of Manufacturing and Technical Support, Lexmark International, S.A., Boi-

gny,France.

Thisproduct satisfies the Class A limits of EN 55022 and safety requirements of EN

60950.