224
Chapter 12: Optional 500-Sheet Drawer
5Pull the input tray out of the support unit.
Remove any packing material and tape fromthe
input tray.
6Grasp the support unit on each side at opposite
corners and move it to the location being used.
7Notice the following parts located on the top sur-
face of the optional support unit: the tab, the
round hole, and the four square holes.
8Lift the printer by the handholds or ask someone
to help you lift the printer.
The bottom surface of the printer has matching
holes or feet that accommodate the tab, roundhole,
and four squareholes.
Caution! Make sure yourfin-
gers are not under the printer
when you set it down.
Tab
RoundHole
SquareHoles
SquareHoles