181

Network Printing Problems

Network PrintingProblems
Option does not operatecorrectly
after it is installed.
(continued)
InfraredAdapter: If infrared communication stops or does not occur, check the
following:
•Communicationdistance: The distance between the two infrared por ts
shouldbe 3 meters (10 ft.) or less. If communication does not occur between
ports, movethe por ts closer together.
•Makesure both por ts are stable.Make sure the computer is on a level
surface.
•Makesure the angle of communication between the two infrared ports is
within 15 degreesof either side of an imaginar y line drawnbetween the two
infraredpor ts.
•Makesure there is no bright light, such as direct sunshine,interfering with
communication.
•Makesure no objects are placed between the two infrared ports.
Parallel/USBInterface Option: Check to make sure the parallel/USB interface
optioncard is securely connected to the printer system board. See
“Parallel/USBInterface Option Card”on page 215 for more information.
Problem(continued) Action(continued)
Problem Action
Job didnot p rint or incorrect
characterspr inted. Ifyou are using a Lexmark inter nal print server or external print server, verify
thatit is setu p properly and the network cable is connected.
Note: Referto the documentation that comes with your print server for more
information.
For Novell users :
•Makesure the netware.drv file is dated October 24, 1994 or later.
•Makesure the NT (no tabs) flag is included in the capture statement.
ForMacintosh users:
•The printer mayneed an optional inter nal print server to allow Macintosh
connection.
•Verifythat the printer is set up correctly in CHOOSER.