Inserting a scene

 

Insertion d’une scène

 

 

 

You can insert a scene in the middle of a recorded tape by setting the start and end points. The previously recorded frames between these start and end points will be erased.

Use the Remote Commander for this operation.

Vous pouvez insérer une scène au milieu d’une cassette enregistrée en réglant les points de début et de fin. Les images enregistrées précédemment entre ces points de début et de fin sont supprimées.

Utilisez la télécommande pour effectuer cette opération.

[a]

 

 

[b]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) In the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b].

(2) Press ZERO SET MEMORY on the Remote Commander.

The ZERO SET MEMORY indicator flashes and the counter resets to zero.

(3) Keep pressing the – 7 side of EDITSEARCH and release the button at the insert start point [a].

(4) Press START/STOP to start recording. The scene is inserted. Recording stops automatically near the counter zero point. Your camcorder returns to the standby mode. The zero set memory function is cancelled.

ZERO SET

MEMORY

(1) En mode d’attente, maintenez la touche EDITSEARCH enfoncée et relâchez la touche lorsque vous avez trouvé le point de fin d’insertion [b].

(2) Appuyez sur ZERO SET MEMORY sur la télécommande.

L’indicateur ZERO SET MEMORY clignote et le compteur revient à zéro.

(3) Maintenez le côté – 7 de EDITSEARCH enfoncé et relâchez la touche lorsque vous avez atteint le point de départ d’insertion [a].

(4)Appuyez sur la touche START/STOP pour lancer l’enregistrement.

La scène est insérée. L’enregistrement s’arrête automatiquement lorsque le compteur se rapproche de zéro. Votre caméscope revient en mode d’attente.

La fonction de mémoire à zéro réglable (ZERO SET MEMORY) est désactivée.

EDITSEARCH

108