Enlarging still images recorded on a “Memory Stick” – Memory PB ZOOM

Agrandissement d’images fixes enregistrées sur un “Memory Stick” – PB ZOOM Mémoire

You can enlarge still images recorded on a “Memory Stick.” You can select and view a desired part from the enlarged still image. Also, you can copy the desired part of the enlarged still image to a tape.

Before operation

Insert a “Memory Stick” into your camcorder.

(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position.

(2) Press PB ZOOM on your camcorder while you are playing back images recorded on the “Memory Stick.” The centre of the image is enlarged to about twice its size, and appear on the screen.

(3) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the dial.

: To view the upper part of the image

: To view the lower part of the image (4) Turn the SEL/PUSH EXEC dial to move the

enlarged image, then press the dial.

: To view the left part of the image (Turn the dial downward.)

: To view the right part of the image (Turn the dial upward.)

(5) Adjust the zoom ratio by the power zoom lever.

You can enlarge the image from 1.1 times up to five times its size.

W : To decrease the zoom ratio

T : To increase the zoom ratio

Vous pouvez agrandir des images fixes enregistrées sur un “Memory Stick”. Vous pouvez sélectionner et visionner une partie précise de l’image fixe agrandie. Vous pouvez également copier sur une cassette la partie souhaitée de l’image fixe agrandie.

Avant de commencer

Insérez un “Memory Stick” dans votre caméscope.

(1) Réglez le commutateur POWER sur MEMORY ou VCR. Assurez-vous que le commutateur LOCK est réglé sur la position de déverrouillage (gauche).

(2) Appuyez sur PB ZOOM sur votre caméscope pendant la lecture des images enregistrées sur le “Memory Stick”. Le centre de l’image est agrandi à environ deux fois sa taille d’origine

et s’affiche à l’écran.

(3) Tournez la molette SEL/PUSH EXEC pour déplacer l’image agrandie, puis appuyez sur la molette.

: Pour visionner la partie supérieure de l’image

: Pour visionner la partie inférieure de l’image

(4) Tournez la molette SEL/PUSH EXEC pour déplacer l’image agrandie, puis appuyez sur la molette.

: Pour visionner la partie gauche de l’image (Tournez la molette vers le bas.)

: Pour visionner la partie droite de l’image (Tournez la molette vers le haut.)

(5) Réglez le taux d’agrandissement avec le levier de puissance de zoom.

Vous pouvez sélectionner un taux d’agrandissement de l’image allant de 1,1 fois à cinq fois sa taille d’origine.

W:Pour diminuer le taux d’agrandissement T : Pour augmenter le taux d’agrandissement

Lecture – Stick” “Memory Opérations Playback – Operations Stick” “Memory

215