Connecting your camcorder to your computer using the USB cable

Making the computer recognise

the camcorder

Viewing images recorded on a “Memory Stick”

(1) Insert a “Memory Stick” into your camcorder.

(2) Connect the AC Adaptor and set the POWER switch to MEMORY.

(3) Connect the (USB) jack on your camcorder to the USB connector on your computer using the supplied USB cable.

“USB MODE” appears on the screen of your camcorder. Your computer recognises the camcorder, and the Add Hardware Wizard starts.

Raccordement de votre caméscope à votre ordinateur à l’aide du câble USB

Détection du caméscope par

l’ordinateur

Visionnage d’images enregistrées sur un “Memory Stick”

(1) Insérez un “Memory Stick” dans votre caméscope.

(2) Branchez l’adaptateur secteur, puis réglez le commutateur POWER sur MEMORY.

(3) Raccordez la prise (USB) de votre caméscope au connecteur USB de votre ordinateur à l’aide du câble USB fourni. “USB MODE” s’affiche sur l’écran de votre caméscope. Votre ordinateur détecte le caméscope et l’assistant d’ajout de matériel démarre.

(USB) jack/ Prise (USB)

USB connector/ Connecteur USB

Your on Images Viewing

Push into the end/

Insérer jusqu’au bout

USB cable (supplied)/ Câble USB (fourni)

Computer

(4) Follow the on-screen messages so that the Add Hardware Wizard recognises that the USB drivers have been installed. The Add Hardware Wizard starts two times because two different USB drivers are installed. Be sure to allow each installation to complete without interrupting them.

You cannot install the USB driver if a “Memory Stick” is not in your camcorder. Be sure to insert a “Memory Stick” into your camcorder before installing the USB driver.

(4) Suivez les messages à l’écran pour que Assistant d’ajout de matériel détecte que les pilotes USB sont installés. L’assistant Ajout de nouveau matériel démarre deux fois parce que deux pilotes USB différents sont installés. Laissez chaque installation suivre son cours sans l’interrompre.

Vous ne pouvez pas installer de pilote USB si aucun “Memory Stick” n’est inséré dans votre caméscope.

Insérez un “Memory Stick” dans votre caméscope avant d’installer le pilote USB.

ordinateur votre sur d’images Visionnage

239