
Using the Stored Shift Configurations Screen
The Stored Shift Configurations screen, shown below, is very similar during
call management and administration.
Bon Voyage Travel | DAY CMSIIR2 | 4:25p 06/02 |
STORED SHIFT CONFIGURATIONS
1 - DAY
2 - 28AGTS
3 - 14AGTS
4 - 14&14
5- UNUSED
6- UNUSED
|
|
|
|
|
|
|
|
|
| F10 | - Help |
F | Select | F | S a v e | F | Rename | F | Choose | F | Config | F | System |
1 | Config | 2 | Config | 3 | Config | 4 | 7 | Screen | 8 | Status |
The shift configuration currently in use for call management is shown in reverse video. If you made any changes to the configuration but have not yet saved them, the word (changed) appears to the left of that configuration number. If you have chosen a configuration to be invoked automatically when you start call management, the words (startup default) appear next to that configuration name.
During call management, you can perform these activities with the Configuration List:
Select a shift configuration for call management or change from one configuration to another.
Save the changes you made during dynamic reconfiguration.
Rename a configuration.
Choose a startup configuration.
To use the Configuration List, press the function key for the activity you want to perform:
[ F1 ] Select Config. Use this function key to select a shift configuration for call management or to change from one configuration to another.
Prompt: SELECT CONFIGURATION: Config #: _
Action: | Enter a configuration number (1 though 6) |
Press [ F8 ] (labeled “Enter Data”).