Call Management Problems | AT&T 999-501-149 manual

	Possible cause	Corrective action
	Possible cause	Corrective action
	The cable is faulty.	Try switching the cables plugged into CU 1
		and CU2. Unplug the cable from CU 1 and
		plug it into CU 2, and vice versa. If the CU 1


		indicator on the screen stops flashing and the
		CU 2 indicator appears on the screen, you
		know the problem is either a faulty cable or a
		faulty MERLIN II system component. Do not
		plug the cables back into their original jacks on
		the CMS card. Restart CMS. CMS can
		manage calls using only the CU 1 jack while
		you further isolate and correct the problem.

	The jack assigned to CU	1 Unplug the CU 1 cable from its jack in the
	1 in the MERLIN II	MERLIN II system control unit and plug it
	system control unit is	into another attendant jack. The control
	faulty.	unit jacks that can be attendant jacks are
		marked “ATT” on the Station Jacks section
		of the MERLIN II system Master Planning
		Form.
		2 Administer the jack as an attendant jack
		following the instructions under the
		heading “Designate Attendant Positions”
		in “Step 3: Perform Basic Administration”
		in Section 4 of the MERLIN II
		Communications System with Feature Module 2
		Installation and Administration Manual.

	The CU 1 jack on the	If none of the above actions correct the
	CMS card is faulty.	problem, contact your equipment supplier for
		assistance.

Call Management Problems 9-11

Image 180

AT&T 999-501-149 system manual Call Management Problems

Contents

Merlin lI 1988 AT&T Issue All Rights Reserved Contents Generating Reports How to Use the CMS Documents CMS USER’S Card What’s in This Manual Documentation Conventions This italic typeface represents a Merlin II system response Overview Key Concepts Key Concepts 4Key Concepts Typical CMS Application Bon Voyage Travel’s CMS Special Line Group 6A Typical CMS Application CMS and Other Businesses Key Facts and Considerations Merlin II System Installation and Administration Manual Line Group and AgentSplit Considerations External Alerts CMS Enhancements Software Considerations Hardware Considerations Duplicating the CMS Diskette Duplicate Duplicating the CMS Diskette 4Duplicating the CMS Diskette Duplicate Installing the CMS Software Installing the Software Starting the CMS Program Automatically Setting the Time and Date SET the Date SET the Time Using Your PC with CMS Agent Splits 10Using Your PC with CMS Entering and Editing Data Entering Data AT Prompts Line Group OptionsCall Flow ACW Press To move Entering Data Using the Help Editing DataScreens Administration Menu Select Administration Function A map of CMS administration screens Start Administering CMS Getting StartedMain Menu CMS 4Getting Started Building or Editing Shift Configurations Line group Main split Secondary split Configurations Stored Shift ConfigurationsUSE the Stored Shift Screen Editing a Shift Configuration Configuration Agent Splits Line Group Options Administering Splits Suppt 10Building or Editing Shift Configurations Prompt ActionMake entries in these fields as follows Administering Line Group Options Answer Delay Force Delay Automatic AfterCALL-WORK ACW Administering Call Flow 14Building or Editing Shift Configurations All-Ring Config On/Off Screen Administer Call Flow or ALL-RING Operation Prompt SET Intraflow Threshold Split # Threshold seconds Clearing a Configuration Saving an Edited Changed Configuration Returning to Other Screens Renaming a Shift Configuration Selecting a Startup Configuration Using the Agent Directory Screen Assigning Agent IDsAgent Directory 22Assigning Agent IDs Assigning Agent IDs Administering Lines and Line Groups 24Administering Lines and Line Groups Administer Lines and Groups Administer Lines and Line Groups 26Administering Lines and Line Groups Prompt Change Priority Line ID Setting Options Service Level Limit Abandoned Call Threshold Audible Alarm SET Options ZET Options Selecting Exceptions Exception Settings Instructions for Selecting Exceptions Assigning External Alerts to Exceptions 34Selecting Exceptions Selecting Exceptions Changing or Removing Line Button Assignments Oldest Call ON/OFF? Selecting Agent Exceptions Exceptions Talk Time Selecting Split Exceptions Exception Type on or off to turn this exception on or off. PressF6 labeled Next Field to keep the current value 42Selecting Exceptions Selecting Line Group Exceptions Administer a Line Group Exception External Alert Checklist Summary Checklist 46Selecting Exceptions Backing Up Shift Configurations Copy Shift Configurations 48Backing Up Shift Configurations Overview Map of the screens for call management Administator/Supervisors Responsibilities Attendant Console Line Buttons Auto Intercom Buttons Group Touch Intercom-Voice 6The Attendant Console Merlin II System Display Console Startup Procedures 8Startup Procedures Startup Procedures Initialization Complete ... Ready for Input Startup Procedures Making Agents Available for CMS Calls Agents VoiceTerminal Button Requirements Available State AFTER-CALL-WORKState LOGIN/LOGOUT CALL-WORK StateSupervisory Using the System Status Screen Monitoring Call Management System Status Line Group Information Split Information Monitoring Call Management Key to System Status Data Line Group Information Split InformationCurrent Status of Agents and of Waiting Calls Record of Calls Received during Current How’ Using the Split Status Screens Split Status Information Split 1 Pers 20Monitoring Call Management Key to Split Status Data Agent StatusIndividual Agents Agent Summary Line Using the Line Status Screen Split StatusCall Flow Line Status Change Priority Line ID Key to Line Status Data Line StatusLine Group Summary Line Using the Events Log Screen Time Date Event 26Monitoring Call Management Dynamic Reconfiguration Reconfiguration Beginning Dynamic Reconfiguring Splits F2 Remove Agent Changing Answer Delay, Force Delay, or Auto ACW Example Pers Prompt Answer Delay Group Letter How Many Seconds Connect directly to the message Answer Force T o E l a y Delay 36Dynamic Reconfiguration Automatic ACW Bottom of the screen. Refer to the following example To change Auto ACW for any line group, respond to the prompt Reconfiguring Call Flow 40Dynamic Reconfiguration Prompt Change ALL-RING Operation Split # Using the Stored Shift Configurations Screen Save Configuration Replace Contents of Config # NAME? Y/N 44Dynamic Reconfiguration Selecting Day or Night Service If you typed y to change mode, the prompt line reads ADMINISTRATOR’S Day-to-Day Operation of CMSActivities AT BON Voyage Travel 48Day-to-Day Operation of CMS Overview Merlin II System Voice Terminal Analog Voice Terminal AT&T BIS-10 Digital Voice Terminal 7406 Digital Voice Terminal Selecting a Voice Terminal for Your Agents Line ButtonsPooled System Manual Signaling and Auto Intercom Buttons Square SystemAuto Intercom Buttons Manual Signaling 6Selecting a Voice Terminal for Your Agents Programming a Voice Terminal Basic ProgrammingInstructions Merlin II System Manual Programming Feature name Code Programming Feature name Codes Announcing Availability for CMS Calls Available and ACW ButtonsCMS work state Available button light ACW button light For Available Touch Available Light next to Available goes onAfter-Call-Work State Light next to ACW goes on With the previous CMS call Using Merlin II System Features with CMS Agent is automatically connected to the CMS call Lights Line status Placing Intercom Calls Manual Signaling Buttons Touch Intercom-RingTouch Intercom-Ring or Intercom-Voice Touch Conference Auto Intercom Buttons Transferring Calls to Another Split Touch TransferTransferring Calls to a Person in the Merlin II System Transferring Calls with Voice Announcement Touch Transfer Touch Intercom-VoiceAgent is automatically connected to the incoming call Types of Ringing SoundsType of call Sound of ring Programming Touch Select Ring You hear the voice terminal’s current ringRinging Options Red light next to Line button goes off Overview Types of CMS Reports Agent Split Summary Daily Agent SplitM M a R Y Daily ACD Calls Other Daily CallsAdditional Data Split Report Cumulative Agent Split SummaryDaily Split Summary ACD Calls Typical Daily Split Report appears below Types of CMS Reports Cumulative Split Report by Hour Typical Cumulative Split Report By Day appears below Typical Cumulative Split Report by Hour appears below Line Group Report Group D Corp ACD Calls Other Calls Additional Data for Daily CallsCumulative Line Group Report by DAY Cumulative Line Group Report by Hour Events Log Report Types of CMS Reports How to Generate Reports Report Menu How to Generate Reports Print Split Report Summary on Generating Individual Reports Print Split Reports Generating Events Log Report Transferring Historical Data Onto Diskettes Shows the locations of the directories and files CMS uses Copying the System Tables File Copying Historical Data FilesErasing Files from the Hard Disk Saving the Current System Tables Copying the Historical System TablesCopying the Historical Data Files Restoring Data Collection Conditions Generating ReportsErasing the Historical Data from the Hard Disk Restoring the Current System Tables Overview Startup Problems Error MessagesERROR-No Lines in CMS. Administer Lines Possible cause Corrective action ERROR-No Configuration Found. Administer System ERROR-CMS Card Faulty or Not Found. CMS Cannot Manage CallsDescribed in the lnstallation and Getting Started Guide for the Call Management ERROR-CU 1 Faulty or Disconnected. CMS Cannot Manage Calls Communications System with Feature ModuleInstallation and Administration Manual Status lndicator CU 1 flashing Status Indicator CU 6Startup Problems Possible cause Status Indicator LoStorage Status Indicator NoStorageStatus Indicator MSG Data Status Indicator Don’tPrtSc Call Management Problems Status Indicator CU 1 flashing Call Management Problems Described in the Installation and Getting Installation and Getting Started Guide for the call CMS in the Merlin II Comunications SystemManagement System System Errors What They MeanWhat to do Voice Announcement Unit Problems External Alert Problems Printer Problems Status Indicator Don‘tPrtSc Report ABORTED-Printer Not Ready Agent Problems Agents are touching the ACW button after they hang up Lines not set to No Ring Set lines to No Ring Managing Calls if CMS is Disabled What YOU should have What YOU should Know What YOU should do Pooled System Button Access Pooled System Dial Access 24Managing Calls if CMS is Disabled Overview Quick Reference Guide to Your PC Keyboard F9 F10 Prompt Using the Keys Quick Reference Guide to Entering and Editing DataPress Do this Quick Reference Guide to Dynamic Reconfiguration Configure Splits Map of Screens for CMS Administration Map of Screens for CMS Administration Map of Screens for Call Management Name Overview G-1 CMS Terms ACD CMS Terms G-3 4CMS Terms CMS Terms G-5 6CMS Terms CMS Terms G-7 CMS Status Screens System Status ScreenLine Group Information CMS Status Screens G-9 ASA Split Status Screen Split Status Call Flow Information Line Status Screen 14CMS Status Screens CMS Reports Daily Agent Split Summary ACD Calls Avg After Call Cumulative Agent Split Summary Daily Split Report Other Calls Cumulative Split Report By Day or Hour Daily Line Group Report XFR Calls BUSlEST Hours Cumulative Line Group Report by day or hour Index CMS 2Index