Overview

TRANSFERRING HISTORICAL DATA ONTO DISKETTES

Archiving is the process of copying historical data from the hard disk to diskettes. You need to archive data when the hard disk begins to run out of space and you want to save your old files. You should archive data once a month to keep the system running efficiently.

This section discusses how to archive data and contains information about the directories and files CMS uses. It includes procedures for copying the system tables and historical data files to a diskette with the MS-DOS copy command, and for erasing these files from the hard disk with the MS-DOS erase command. This section also tells you how to restore archived data to the hard disk so that you can print historical reports.

To print historical reports from archived data, you need the system tables and historical data files for the days in which you’re interested. The system tables file contains the information that identifies the lines, splits, and agents for which historical data have been saved. Up to four historical data files and one system tables file fit on a single 360K 5 1/4 inch diskette. The 1.44MB storage on a 3 1/2 inch diskette increases that storage four times.

If you are using a 6300 WGS, you’ll be backing up onto 3 1/2 inch diskettes; if you are using the PC 6300, you’ll be backing up onto 5 1/4 inch diskettes.

To clear space on the hard disk, you can simply erase your oldest files; however, if you want to save the data for possible future use, you should archive those files to a diskette first, and then erase them from the hard disk. Copy the four oldest data files and the oldest system table to the diskette. After you verify that the files were copied, erase those files from the hard disk.

If you archive files on a regular schedule, such as once a week, you can avoid running out of space on the hard disk.

Figure 8-1 shows the locations of the directories and files CMS uses.

FIGURE 8-1 Locations of the CMS directories and files.

 

 

 

\(root.directory)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

\cms

 

 

 

other

directories

 

 

 

 

 

 

 

not related to CMS you

 

 

 

 

 

 

 

may create

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

\cms\cmsrept

\cms\cmsmgmt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dyymmdd.cms

systbls.cms

 

shift2.cms

 

(where yymmdd

 

 

 

 

 

 

 

 

 

is a year, month,

 

 

 

 

 

 

 

 

 

and day)

 

 

shift1.cms

 

 

files

for

 

 

 

 

 

 

 

 

 

 

other

shift

configuration

Overview 8-1

Page 166
Image 166
AT&T 999-501-149 Transferring Historical Data Onto Diskettes, Shows the locations of the directories and files CMS uses