If you ever lose a shift configuration (for instance, if you clear a configuration by accident), copy the desired configuration (or all configurations) from the duplicate as follows:

1 Repeat steps 1 through 3 in the previous procedure.

2 To copy all your shift configurations from the duplicate onto the hard disk, type

copy a:shift .cms c:

To copy a single shift configuration from the duplicate, type

copy a:shiftX. cms c:

(Replace X with the number of the shift configuration.)

3 To copy the system tables from the duplicate copy onto the hard disk, type

copy a:systbls.cms c:

4Remove the duplicate when the red light on disk drive C goes out.

For more information on restoring CMS after system problems, see Section 9, “Troubleshooting.”

4-48Backing Up Shift Configurations

Page 77
Image 77
AT&T 999-501-149 system manual 48Backing Up Shift Configurations