
Returning to Other Screens
You can select two other screens from the Configuration screen. If you have just created or edited a configuration, the word (changed) appears next to the configuration name on the screen. You may want to go to the Stored Shift Configurations screen to save your new configuration or the old one you have edited. Pressing [ F7 ] (labeled “Config List” ) selects the Stored Shift Configurations screen, from which you can:
●Edit a configuration
●Save your editing changes (or save a new configuration you’ve just built)
●Rename a configuration
●Select a startup configuration
Pressing [ F8 ] (labeled “Admin Menu” ) selects the administration menu. It lists the main CMS administration activities.
Saving an Edited (Changed) Configuration
When you build a new shift configuration or make changes in an existing one, the word (changed) appears on the configuration list to the left of that configuration number. You can store the last edited configuration in a previously unused configuration or store it in place of another configuration.
For example, you could edit configuration 1 (shift 1 in our example) and replace the original with the updated copy. If you want to keep the original shift 1 configuration as well as the edited copy, store the copy in an unused configuration number.
Pressing [ F2 ] (labeled “Save Config”) on the Stored Shift Configurations screen selects this activity. The word (changed) appears next to the configuration you last edited.
Prompt: SAVE CONFIGURATION: Into Config #: _
Action: 1 Press [ F8 ] (labeled “Enter Data”) to save the edited configuration under the same configuration name and number as the original (in other words, to replace the original with the updated copy).
or
Enter a configuration number and press [ F8 ] (labeled “Enter Data”) to save the edited configuration under a different configuration number.
2 A second prompt appears:
SAVE CONFIGURATION: Replace Contents of Config X
NAME? (Y/N):_
The number and name of the configuration you edited appear in this prompt. Type y to confirm your request or n to deny it. Press [ F8 ] (labeled “Enter Data”).
Building or Editing Shift Configurations |