User’s Guide
You can control the display of the number that calls are connected to, and remove certain number sequences that are not important. For example, if you click on Strip Service Code, then the displayed number will have entries such as *67 or *82 (these block or unblock Caller ID, for example) removed from the dialed number display.
If you check Strip Carrier Access Code, then long distance access codes are removed from the displayed number. These are dialing patterns such as *1010288, to access a long distance carrier of your choice.
NexDirector can scan and display the status of up to 96 outside lines, and 160 inside lines. When you first run NexDirector, the maximum numbers will be set automatically based on the current configuration. You can adjust the numbers on this dialog box to monitor fewer lines. By reducing the maximum number of lines that NexDirector scans, you can reduce the number of tab views, for convenience.
You can also enter the number of rows and columns you want for this view. This is changeable on an instance (or view) by instance basis. Or, somewhat more easily, you can resize the window using the mouse in the traditional Windows fashion. See “Resizing the Window” on page 104 for more details.
Although each view or instance of the program (see “Configuration Management- Multiple Views” on page 101) has the setting for maximum number of lines, only the settings in the first view have effect.
Tabs and Views
At the top of the window, just below the file bar on NexDirector, there are several tabs that control the dis- play you are viewing. See Figure
After cycling the arrows to the tab you are interested in, you must then click with the mouse on the tab to bring it into view.
The arrows will not appear if the window is sized large enough so that all of the tabs can be displayed.
