![](/images/new-backgrounds/1194842/194842201x1.webp)
Installing the New Fuser
Use the following procedure to install the new fuser in the printer.
1.Use the green fuser handholds to put the new fuser on the sliding plate with the oil bottle holder positioned to the front of the printer. Position the 2 blue locating guides on the plate in the locating holes in the bottom of the fuser.
2.Use even pressure on the 2 black pull knobs (see step 2 on page
3.Alternately tighten the 2 fuser screws, approximately 2 turns each, until they are tight.