IBM S544-5361-01 quick start Diagnosing Printer Problems

4.Press the ENTER push button to confirm the density change of the color you selected. The light for the density you selected stops flashing and remains on.

5.To adjust the other colors, repeat the steps above.

6.Print a test page (see “Printing a Test Page” on page 4–10)and compare it to the test page that you printed when you installed the printer.

Notes:

1.The new color density remains in effect after you turn off the printer.

2.The density control panel returns to an idle state if no activity is detected within 20 seconds. In this state, the COLOR SELECT display goes off, and only the DEFAULT light on the density gauge lights up if all color settings are the same as the factory default settings; otherwise they will all go off. If you press the (–) and (+) push buttons for more than 5 seconds, all the color density values are restored to the factory default settings.

Chapter 6. Diagnosing Printer Problems 6–23