Printing Test Prints from the Density Control Panel

This section tells you how to print a test print using the density control panel.

You can print test prints in various grid and line patterns to use during diagnostic procedures. Use the following procedure to print a test print from the density control panel.

1.While you hold down the COLOR SELECT push button, press the ENTER push button 8 times. All the color lights flash and the printer enters the test pattern selection mode.

2.Use the () or (+) push button to choose a test pattern. The light for the test pattern you selected flashes if the setting is different from the factory default.

6–24IBM Network Color Printer Operator’s Guide

Page 138
Image 138
IBM S544-5361-01 quick start Printing Test Prints from the Density Control Panel