7.Press the green tab [1] on the right side of the photoconductor drum cartridge and pull the drum cartridge out [2] of the printer onto the shield.
Installing a New Photoconductor Drum Cartridge
Use the following procedure to install a new photoconductor drum cartridge in the printer.
1.Get a new photoconductor drum cartridge and remove it from the protective bag.
Notes:
1)Do not open the protective bag or the photoconductor drum cartridge cover until you are ready to install the cartridge in the printer.
2)Do not expose the photoconductor drum cartridge to or store it in direct sunlight.
3)Do not remove the orange protective shield from the cartridge until you are instructed to do so.
2.Use the arrow on the cartridge as a guide to align the photoconductor drum cartridge with the arrow on the printer. The orange photoconductor drum shield rests on a
Do not use excessive force on the shield when you handle the photoconductor drum cartridge. If you do, you may scratch the
