![](/images/new-backgrounds/1194842/194842125x1.webp)
Entering a Password
If your system administrator has assigned a password for the Run Setup menus, use the following procedure to enter that password.
1.When a password is required, you see ENTER PASSWORD on the display panel. Use the Menu Scrolling push buttons (−↓) to set the first alphanumeric character of the password on the second line of the display panel.
2.Use the right Cursor Position push button (→) to advance the cursor to the next character position.
3.Repeat step 1 and step 2 for each character in the password.
4.When you finish entering the password, press the Enter push button.
a.If you entered the right password, you see PRINTER SETUP on the second line of the display panel.
b.If you entered a wrong password, you see PASSWORD INCORRECT on the display panel. Press the Enter push button. You see TRY AGAIN on line 1. Press the Enter push button and repeat step 1 through step 4.
Deleting a Password
If you forget the password or no longer want to use one, use the following procedure to delete the password.
1.Turn off the printer.
2.Turn on the printer.
3.Watch closely to see the message PRESS MENU FOR SETUP on the display
panel. When you see the message, press the up and down Menu Scrolling push buttons (−↓) at the same time.
4.You see on the display panel DELETING SETTINGS... and PLEASE WAIT, STARTING UP. When the printer completes its startup procedure, you may access the offline menus to set a new password (see “Changing the Password” on page
Changing a Password
See “Changing the Password” on page